Specifications:ICP-GRANDAIRE MODEL
Outdoor Unit Details W4A5S18AKAWA condenser NOT A HEAT PUMP!
Tonnage
|
1.5 Ton
|
Cooling Capacity (btu)
|
up to 18000 Btu
|
SEER2 / EER2
|
14.3 /11.7 |
Voltage-HZ / Phase |
208/230 60 1 Phase |
Max Breaker Size
|
|
Min/Max Volts |
197/253 |
Refrigerant Type |
R410 A |
Suction Line Size |
|
Liquid Line Size |
3/8" |
Unit Dimensions |
27.8"W x 27.8"D x 25H |
Sound Level |
|
Weight |
|
ICP/GRANDAIRE Model Air Handler- WBHL184AA
About This Product
Multi-Position Air Handler is suitable for use with r R-410A .
Specifications - Indoor Unit (Multi Position - Multi Speed)
Tonnage
|
1.5 Ton
|
Cooling Capacity (btu)
|
18,000 BTU
|
Electric Heat Capacity
|
5,8,10,15,20kw kW
|
Voltage - HZ / Phase
|
208/230 / 1 Phase
|
Min/Max Volts
|
197/253
|
Max Breaker Size
|
15 amps
|
CFM High/Low 0.3
|
892 high / 552 low
|
Unit Dimensions
|
17.625" W x 22.062" D x 49.625" H
|
Supply Plenum Dimensions
|
15.75” W x 11.” D
|
Return Plenum Dimensions
|
15.5” W x 19.8” D
|
Suction Line Size
|
5/8"
|
Liquid Line Size
|
3/8"
|
Blower Motor HP
|
1/3 ECM
|
Blower Motor Speed
|
Multi Position -5 Speed ECM
|
Refrigerant Type
|
R410A
|
Shipping Weight
|
122 Lbs
|
FEATURES:
CONDENSER
- REFRIGERATION CIRCUIT Scroll compressors on all models
- Suction line accumulator factory installed
- Integrated solid state control with Time−Temperature Defrost
- High and Low pressure switches
- Copper tube / aluminum fin coil
- Easy Access service valves on all models
- External high and low refrigerant service ports
- Only two screws to access control panel
- Factory charged with R−410A refrigerant
- Painted cabinet finish over galvanized steel
- Coated inlet grille with 3/8” (10mm) grille spacing for extra protection (hail guard)
- AHRI Certified, ETL Listed
AIR HANDLER
- Factory installed TXV metering device
- Sweat connections
- Aluminum Tube, Aluminum Fin Evaporator
- Primary and secondary drain fittings
- Multiple electrical entry locations
- Time delay relay (TDR) Field installed Heat Strips from 5 kW − 20 kW
- Tested & Certified to achieve a 2% or less leak rate at 1.0 inch water column
- 1 inch thick insulation with R value of 4.2
- Bult in 1"Filter Rack-(filter sold separately)
- ECM 5−speed motor
- Multiposition installation − upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
- Low voltage circuit protective fuse (3amp) inline on wire harness
- Pictures are generic and System is sent as Upflow and convertible to Downflow
DONT FORGET TO ORDER THE ACCESSORIES!
- Thermostat Wire
- Condenser Pad
- Flexible Duct R6/R8
- Insulated Copper Linesets
- Pan Overflow Shutoff Switches
- Mastic
- Glass Fab
- Aluminum Silver Tape
- Black Cloth Duct Tape
- Ductboard 1" a 1-1/2 inch thick
- Lineset Flush
- Vacuum Pumps
- R407C and 410a Refrigerant
- WE HAVE IT ALL! for your installation!