Grandaire
2.5 ton 15.5 SEER2 ICP-Grandaire Model A/C Split System
- SKU:
- BASE33103
- Weight:
- 250.00 LBS
- Shipping:
- Free Shipping
Description
This is what you get:
- Condenser Model#W4A5S30AKAWA+NOT A HEAT PUMP
- Air Handler Model#WBHL304AB
- FREE Shipping!
Specifications:ICP-ECOTEMP MODEL
ECOTEMP/Grandair Is made by ICP( International Comfort Products)The same Company that Manufactures Carrier Brand
Outdoor Unit Details W4A5S30AKAWA Condenser NOT A HEAT PUMP!
Tonnage |
2.5 Ton |
|
Cooling Capacity (btu) |
up to 30000 Btu |
|
SEER / EER |
14 Seer /12 EER | |
Voltage-HZ / Phase | 208/230 60 1 Phase | |
Max Breaker Size |
|
|
Min/Max Volts | 197/253 | |
Refrigerant Type | R410 A | |
Suction Line Size |
|
|
Liquid Line Size | 3/8" | |
Unit Dimensions | 32"W x 32"D x 34"H | |
Sound Level |
|
|
Weight |
|
|
About This Product
Multi-Position Air Handler is suitable for use with r R-410A .
Specifications - Indoor Unit (Multi Position - Multi Speed)
MODEL WBHL304AB
Tonnage |
2.5 Ton |
Cooling Capacity (btu) |
30000 BTU |
Electric Heat Capacity |
5,8,10,15,20kw kW |
Voltage - HZ / Phase |
208/230 / 1 Phase |
Min/Max Volts |
197/253 |
Max Breaker Size |
15 amps |
CFM High/Low 0.3 |
1065 high / 757 low |
Unit Dimensions |
17.625" W x 22.062" D x 49.625" H |
Supply Plenum Dimensions |
15.75” W x 11.” D |
Return Plenum Dimensions |
15.5” W x 19.8” D |
Suction Line Size |
3/4" |
Liquid Line Size |
3/8" |
Blower Motor HP |
1/3 ECM |
Blower Motor Speed |
Multi Position -5 Speed ECM |
Refrigerant Type |
R410A |
Shipping Weight |
122 Lbs |
FEATURES:
CONDENSER
- REFRIGERATION CIRCUIT Scroll compressors on all models
- Suction line accumulator factory installed
- Integrated solid state control with Time−Temperature Defrost
- High and Low pressure switches
- Copper tube / aluminum fin coil
- Easy Access service valves on all models
- External high and low refrigerant service ports
- Only two screws to access control panel
- Factory charged with R−410A refrigerant
- Painted cabinet finish over galvanized steel
- Coated inlet grille with 3/8” (10mm) grille spacing for extra protection (hail guard)
- AHRI Certified, ETL Listed
- Factory installed TXV metering device
- Sweat connections
- Aluminum Tube, Aluminum Fin Evaporator
- Primary and secondary drain fittings
- Multiple electrical entry locations
- Time delay relay (TDR) Field installed Heat Strips from 5 kW − 20 kW
- Tested & Certified to achieve a 2% or less leak rate at 1.0 inch water column
- 1 inch thick insulation with R value of 4.2
- Bult in 1"Filter Rack-(filter sold separately)
- ECM 5−speed motor
- Multiposition installation − upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
- Low voltage circuit protective fuse (3amp) inline on wire harness
- Thermostat Wire
- Condenser Pad
- Flexible Duct R6/R8
- Insulated Copper Linesets
- Pan Overflow Shutoff Switches
- Plenums
- Mastic
- Glass Fab
- Aluminum Duct Tape
- Black Cloth Duct Tape
- Ductboard 1" a 1-1/2 inch thick
- Lineset Flush
- Vacuum Pumps
- R22 and 410a Refrigerant
- WE HAVE IT ALL! for your installation!
WE INSTALL IN FLORIDA !! Through our
INSTALLATION NETWORK and in many other states
Dont forget to call and Join our network for free and get further discounts