Grandaire

2 ton 15.5 SEER2 ICP Grandaire Model A/C Split System

Write a Review
SKU:
BASE33102
Weight:
275.00 LBS
Shipping:
Free Shipping
  • 2 ton 14 seer ICP Grandaire Model A/C Split System
  • 2 ton 15.5 SEER2 ICP Grandaire Model A/C Split System
  • 2 ton 15.5 SEER2 ICP Grandaire Model A/C Split System
$2,439.00

Description

This is what you get:

  • Condenser Model#W4A5S24AKAWA+NOT A HEAT PUMP
  • Air Handler Model#WBHL244AB
  • FREE Shipping!

 

Specifications:ICP-GRANDAIRE MODEL

GRANDAIRE Is made by ICP( International Comfort Products)The same Company that Manufactures  Carrier Brand 

Outdoor Unit Details W4A5S24AKAWA Condenser NOT A HEAT PUMP!

Tonnage

2 Ton

Cooling Capacity (btu)

up to 24000 Btu

SEER2 / EER2

14.3 /11.7 EER
Voltage-HZ / Phase 208/230 60 1 Phase

Max Breaker Size

20 Amps

Min/Max Volts 197/253
Refrigerant Type R410 A
Suction Line Size

3/4"

Liquid Line Size 3/8"
Unit Dimensions 27.8"W x 27.8"D x 25"H
Sound Level

74 DB

Weight

136 Lbs

   
ICP -GRANDAIRE Model Air Handler

About This Product

Multi-Position Air Handler is suitable for use with r R-410A .

Specifications - Indoor Unit (Multi Position - Multi Speed)

MODEL WBHL244AB

Tonnage

2 Ton

Cooling Capacity (btu)

24000 BTU

Electric Heat Capacity

5,8,10,15,20kw kW

Voltage - HZ / Phase

208/230 / 1 Phase

Min/Max Volts

197/253

Max Breaker Size

15 amps

CFM High/Low 0.3

892 high / 552low

Unit Dimensions

17.625" W x 22.062" D x 49.625" H

Supply Plenum Dimensions

15.75” W x 11.” D

Return Plenum Dimensions

15.5” W x 19.8” D

Suction Line Size

5/8"

Liquid Line Size

3/8"

Blower Motor HP

1/3 ECM

Blower Motor Speed

Multi Position -5 Speed ECM

Refrigerant Type

R410A

Shipping Weight

122 Lbs

FEATURES:

CONDENSER

  • REFRIGERATION CIRCUIT Scroll compressors on all models
  • Suction line accumulator factory installed
  • Integrated solid state control with Time−Temperature Defrost
  • High and Low pressure switches
  • Copper tube / aluminum fin coil
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R−410A refrigerant
  • Painted cabinet finish over galvanized steel
  • Coated inlet grille with 3/8” (10mm) grille spacing for extra protection (hail guard)
  • AHRI Certified, ETL Listed
AIR HANDLER
  • Factory installed TXV metering device
  • Sweat connections
  • Aluminum Tube, Aluminum Fin Evaporator
  • Primary and secondary drain fittings
  • Multiple electrical entry locations
  • Time delay relay (TDR) Field installed Heat Strips from 5 kW − 20 kW
  • Tested & Certified to achieve a 2% or less leak rate at 1.0 inch water column
  • 1 inch thick insulation with R value of 4.2
  • Bult in 1"Filter Rack-(filter sold separately) 
  • ECM 5−speed motor
  • Multiposition installation − upflow or horizontal left standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
  • Low voltage circuit protective fuse (3amp) inline on wire harness
DONT FORGET TO ORDER THE ACCESSORIES! 
  • Thermostat Wire
  • Condenser Pad
  • Flexible Duct R6/R8
  • Insulated Copper Linesets
  • Pan Overflow Shutoff Switches
  • Mastic
  • Glass Fab
  • Aluminum Silver Tape
  • Black Cloth Duct Tape
  • Ductboard 1" a 1-1/2 inch thick
  • Lineset Flush
  • Vacuum Pumps
  • R22 and 410a Refrigerant
  • WE HAVE IT ALL! for your installation!

 

View AllClose

Additional Information

hiddenPrice:
yes
View AllClose