2023 Rheem 3 Ton 14.3 SEER2 Two-Stage Heat Pump Split System

NEW RHEEM 3 TON 14.3 SEER2 HEAT PUMP SPLIT SYSTEM

This matchup provides a total SEER2 rating of 14.3 which you can check with the AHRI #: 208546200 at www.AHRIDirectory.org

RP14AZ36AJ2NA-- 3 Ton 14.3 SEER2 Two-Stage Condenser

Features and Benefits:

• Swept Wing Fan Technology: Features quieter operation and improved unit acoustics
• Two-Stage Scroll Compressor: Features two speeds (high and low) of cooling and heating, providing more precise temperature control, lower humidity and greater efficiency when compared to single stage compressors
• Inverted Reversing Valve: Allows for faster heat transfer with gravity assist shifting and reduced joint stress for increased reliability
• PlusOne® Expanded Valve Space: 3 in. -4 in.- 5 in. service valve space-provides a minimum working area of 27-square inches for easier access
• PlusOne® Triple Service Access: 15 in. wide, industry leading corner service access, two fastener, removeable corner and individual louver panels-makes repairs easier and faster

RH2TZ3617STANNJ-- 3 Ton 2 Stage Constant Torque Motor (ECM) Air Handler

Features and Benefits

• RH2TZ features a Constant Torque motor (ECM) which provides enhanced SEER2 performance with most Rheem outdoor units.
• Versatile 4-way convertible design for upflow, downflow, horizontal left and horizontal right applications.
• Factory-installed indoor coil.
• Sturdy cabinet construction with 1.0 inch [25.4 mm] of foil faced insulation for excellent sound and insulating characteristics
• Field-installed auxiliary electric heater kits provide exact heat for indoor comfort. Kits include circuit breakers which meet U.L. and cUL requirements for service disconnect
• 11/2 ton [5.3 kW] through 5 ton [17.6 kW] models are between 421/2 to 57 inches [1080 to 1448 mm] tall and 22 inches [559 mm] deep.
• All models meet or exceed 330 to 400 CFM [156 to 189 L/s] per ton at .3 inches [.7 kPa] of external static pressure.
• Enhanced airflow up to .7” external static pressure.
• Evaporator is constructed of aluminum fins bonded to internally grooved aluminum tubing.
• Suitable for application in mobile homes.
• Cabinet air leakage less than 2.0% at 1.0 inch H2O when tested in accordance with ASHRAE Standard 193.