Goodman
Goodman 2.0 Ton 17.2 SEER2 Two-Stage Variable Speed Heat Pump Split System (GSZC702410+AMVT30BP1400)
- SKU:
- PA211641717
- MPN:
- GSZC702410+AMVT30BP1400
- Weight:
- 375.00 LBS
- Shipping:
- Free Shipping
Description
Goodman 2.0 Ton 17.2 SEER2 Two-Stage Variable Speed Heat Pump Split System
This is what you get:
Goodman 2 Ton Two-Stage Heat Pump Condenser GSZC702410 (NEWEST MODEL)
Goodman 2.5 Ton Variable Speed Multi-Positional Air Handler AMVT30BP1400 (NEWEST MODEL)
GSZC7 Product Features:
• Two-Stage Copeland® UltraTech scroll compressor
• High-density foam compressor sound blanket
• Integrated communicating ComfortBridge™ technology
• Commissioning and diagnostics via indoor board Bluetooth with the CoolCloud™ phone and tablet application
• ComfortAlert™ built in diagnostics
• Copper tube/enhanced aluminum fin coil- 5mm on 2.0-3.0T
• Efficient, two-speed ECM condenser fan motor
• Simple low-voltage wiring to outdoor unit in communicating mode
• Diagnostic indicator lights and storage of six fault codes
• Color-coded terminal strip for non-communicating set-up
• High- and low-pressure switches
• Time-delay technology with short-cycle protection to ensure quiet, reliable defrost
• Factory-installed bi-flow liquid-line filter drier
• Factory-installed suction-line accumulator
• Factory-installed compressor crankcase heater
• Factory-installed high-capacity muffler
• Factory-installed coil and ambient temperature sensors
• AHRI Certified; ETL Listed Cabinet Features
• Grille-style sound control top design
• Custom Nickel Gray powder-paint finish
• 500-hour salt-spray tested
• Wire fan discharge grille
• Steel louver coil guard
• Single panel access to controls with space provided for field-installed accessories
• Sweat connection service valves with easy access to gauge ports
• When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
GSZC702410 Condenser Specifications | |
Cooling Capacity (BTU/h) | 24,000 |
Heating Capacity (BTU/h) | 24,000 |
Sound Level | 71 |
Compressor Type/Stage | Scroll/Two |
Suction Line Connection Size | 3/4" |
Liquid Line Connection Size | 3/8" |
Voltage-Phase-Hz | 208/230-1-60 |
Max. Breaker Size | 25 Amps |
Min./Max. Volts | 197/253 |
Electrical Conduit Size | 1/2" or 3/4" |
Unit Dimensions | 35.5"W x 35.5"D x 39.5"H |
Equipment Weight | 219lbs. |
AMVT Product Features:
• Internal factory-installed thermal expansion valves for cooling and heat pump applications
• Variable-speed ECM blower motor
• Integrated communicating ComfortBridge™ Technology
• Commissioning and diagnostics via on board Bluetooth with the CoolCloud™ phone and tablet application
• Auto configuration of the airflow and tonnage in communicating mode
• Provides constant CFM over a wide range of static pressure conditions independent of duct system
• CFM indicator
• Fault recall of six most recent faults
• Provides adjustable low CFM for efficient fan-only operation
• Improved humidity and comfort control
• Built-in compatibility with multi-stage heat pump and cooling applications
• All-aluminum evaporator coil
• AHRI certified; ETL listed
• Rigid SmartFrame™ cabinet
• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard 193
• Horizontal or vertical configuration capabilities
• 21" depth for easier attic access
• DecaBDE-free thermoplastic drain pan with secondary drain connections
• Screw-less sides and back helps to reduce condensation when installed in humid locations
• Foil-faced insulation covers the internal casing to reduce cabinet condensation
• Galvanized, leather grain-embossed finish
• Glue-less cabinet insulation retention
• Tool-less filter access
AMVT30BP1400 Air Handler Specifications | |
Cooling Capacity (BTU/h) | 30,000 |
Suction Line Connection Size | 3/4" |
Liquid Line Connection Size | 3/8" |
Voltage | 208/240 |
Max. Breaker Size | 15 Amps |
Min./Max. Volts | 197/253 |
Blower Motor HP | 1/2 |
Blower Motor Speed | Variable Speed |
Unit Dimensions | 17.5"W x 21"D x 53.4375"H |
Supply Plenum Dimensions | 16.3125"W x 11.25"D |
Return Plenum Dimensions | 12.5"W x 19.5"D |
Equipment Weight | 134lbs. |