Goodman
Goodman 3.0 Ton 15.2 SEER2 Apartment Style Heat Pump Split System (GSZH503610+AWST36LU1410)
- SKU:
- PA208839445-3
- Weight:
- 300.00 LBS
- Shipping:
- Free Shipping
Description
Goodman 3.0 Ton 15.2 SEER2 Apartment Style Heat Pump Split System (GSZH503610+AWST36LU1410)
AHRI#: 208839445
GSZH503610 Specifications |
|
Nominal Cooling (BTU/h) | 36,000 |
Nominal Heating (BTU/h) | 36,000 |
Decibels | 72 |
Liquid Line Size | 3/8" |
Suction Line Size | 3/4 |
Volts/Phase (60 Hz) | 208/230-1 |
Min. Circuit Ampacity | 22.8 |
Max. Overcurrent Protection | 35 |
Min./Max. Volts | 197/253 |
Electrical Conduit Size | 1/2" or 3/4" |
Unit Dimensions (LxWxH) | 35.5" x 35.5" x 39.5" |
Unit Weight (lbs.) | 222 |
Standard Features
• Energy-efficient compressor
• SmartShift® technology to ensure quiet reliable defrost
• Enhanced aluminum fin coil with 5 mm diameter copper tubes in 1.5- to 3.5-ton
• Single-speed PSC condenser fan motor
• Factory-installed bi-flow liquid-line filter drier
• Factory-installed suction-line accumulator
• Factory-installed compressor crankcase heater
• Factory-installed high-capacity muffler
• High- and low-pressure switches
• Service valves with sweat connections and easy access to gauge ports
• Fully charged for 15’ of tubing length
• Contactor with lug connection
• Ground lug connection • AHRI Certified; ETL Listed
Cabinet Features
Removable grille-style top design compliant with UL 60335-2-40
• Steel louver coil guard
• Heavy-gauge galvanized-steel cabinet
• Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
• Top and side maintenance access
Goodman AWST36LU1410 Features:
Product Features
• AWST Models: Equipped with a fully adjustable TXV
• Direct-drive, multi-speed motors allows air volume variation for heating/cooling
• Sequence-controlled, rust-resistant nickel chromium heating elements of 3, 5, 8, and 10 kW
• Aluminum tubing coils on all models
• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard 193
• Factory-installed pull-type disconnect
• Thermoplastic drain pan with bottom primary and secondary drain connections
• Built-in filter rack (filter included)
• Large chassis (2½- and 3-ton units) – front return only
• Small chassis (1½- and 2-ton units) – front or bottom return
• Wall-hanging bracket provided • AHRI Certified; ETL Listed