Goodman
NEW GOODMAN R-32 4.0 Ton 15.2 SEER2 Heat Pump Split System (GLZS5BA4810+AMST48CU1300)
- SKU:
- BASE32207
- UPC:
- 663051737686
- MPN:
- GLZS5BA4810+AMST48CU1300
- Weight:
- 437.00 LBS
- Shipping:
- Free Shipping
Description
NEW GOODMAN R-32 4.0 Ton 15.2 SEER2 Heat Pump Split System (GLZS5BA4810+AMST48CU1300)
About the GLZS5BA4810:
Nominal Capacities | Compressor | Motor | Refrigerant | Electrical Data | Weight | Dimensions | ||||||||||||
Cooling BTU/h | Heating BTU/h | Decibels | Stage | Type | Type | Horsepower | Liquid | Suction | Charge (oz.) | Volts/Phase (60Hz) | M.C.A | M.O.P. | Min/Max Volts | Net (lbs.) | Gross (lbs.) | W" | D" | H" |
48,000 | 48,000 | 73.6 | Single | Scroll | PSC | 1/4 | 3/8 | 7/8 | 174 | 208/230-1 | 28.3 | 45 | 197/253 | 264 | 284 | 35.5 | 35.5 | 36.5 |
Standard Features | Cabinet Features | ||||||||
• High-efficiency compressor • SmartShift® technology to ensure quiet reliable defrost • Enhanced aluminum fin coil- 5 mm diameter on 1.5T-3.5 Ton • Enhanced aluminum fin coil with 7mm diameter copper tubes in 4.0- to 5.0-ton • Single-speed PSC condenser fan motor • Factory-installed bi-flow liquid-line filter drier • Factory-installed suction-line accumulator • Factory-installed compressor crankcase heater • Factory-installed high-capacity muffler • High- and low-pressure switches • Service valves with sweat connections and easy access to gauge ports • Fully charged for 15’ of tubing length • Fully enclosed contactor with lug connection • Ground lug connection • Capacitors with extended life • AHRI Certified; ETL Listed |
• Removable grille-style top design compliant with UL 60335-2-40 • Steel louver coil guard • Heavy-gauge galvanized-steel cabinet • Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval • Top and side maintenance access |
About the AMST48CU1300:
Nominal Rating | Blower | Refrigerant | Electrical Data | Weight & Dimensions | ||||||||||||
Cooling BTU/h | Nominal Ton | Type | Horsepower | Full Load Amps | Diameter (IN.) | Width (IN.) | Liquid | Suction | Voltage/Phaze | M.C.A | M.O.P. | Min/Max Volts | Weight (lbs.) | W" | D" | H" |
48,000 | 4.0 | MS-ECM | 3/4 | 5.7 | 10 | 10 | 3/8 | 7/8 | 208/240-1 | 7.1 | 15 | 197/253 | 153 | 21 | 21 | 58 |
Product Features |
• Internal factory-installed thermal expansion valves for cooling and heat pump applications |
• Direct drive, multi-speed ECM blower motor |
• All-aluminum evaporator coil |
• Coil mounting track for quick repositioning |
• Optimized for use with R-32 refrigerant |
• Cabinet air leakage less than 2.0% at 1.0 inch H₂O when tested in accordance with ASHRAE standard 193 |
• Cabinet air leakage less than 1.4% at 0.5 inch H₂O when tested in accordance with ASHRAE standard 193 |
• AHRI certified; ETL listed |
• UL 60335 2-40 Compliant |
• Factory installed R32 sensor designed for lifespan of coil |
• Rigid SmartFrame™ cabinet |
• Horizontal or vertical configuration capabilities |
• 21" depth for easier attic access |
• DecaBDE-free thermoplastic drain pan with secondary drain connections |
• Screw-less sides and back helps to reduce condensation when installed in humid locations |
• Foil-faced insulation covers the internal casing to reduce cabinet condensation |
• Galvanized, leather grain-embossed finish |
• Glue-less cabinet insulation retention |
• Tool-less filter access |